Cedar Siding & Shingles in Buxton, Maine

Census estimates put Buxton's median home built around 1981, with about 19 percent of the housing predating 1940 and roughly 28 percent predating 1960. The town's oldest houses cluster in its historic river villages, where 19th-century homes grew up around water-powered mills and dams on the Saco River. Away from those villages, Buxton's housing spreads across a rural landscape of farmhouses, capes and newer homes built on larger lots, reflecting a town that has stayed more agricultural and less densely developed than its neighbors closer to Portland or the coast.

Buxton sits inland along the Saco River, so its weather runs to a typical southern Maine winter: freeze-thaw cycling that works on old clapboard, paint and roof shingles, and a snow load that has to be planned for on every roof. The river villages of Bar Mills, West Buxton, Salmon Falls and the others sit low relative to the Saco River, and the town's building-permit process specifically asks whether a property falls within a FEMA flood zone or the Shoreland Zoning District, reflecting how much of the town's older housing sits close to the water. Away from the river, exposure is a more ordinary rural Maine winter.

Building permits in Buxton go through the Code Enforcement Office on Portland Road, and the application specifically asks whether a property sits in a FEMA flood zone or the Shoreland Zoning District, reflecting the town's Saco River frontage. Buxton has no public water or sewer utility town-wide; the Code Enforcement Office even provides free well-water test kits for residents, and most exterior work here happens on properties served by a private well and an on-site septic system rather than municipal infrastructure, though that mainly affects site work rather than siding, roofing, window or deck permitting directly.

Cedar clapboards and shingles are the original New England exterior, and for shingle-style cottages, capes and historic homes nothing else looks quite right. Cedar is naturally rot-resistant and light, but it is wood: it needs airflow behind it and a finish that suits the exposure. Pre-finished shingles, such as the Maibec shingles on several projects shown on this site, arrive stained or primed on all sides, which cuts the upkeep and evens out the color.

• Walls are stripped, repaired and wrapped; where it helps drying, a ventilated or drainage layer goes behind the cedar.
• Shingles are coursed and laid out so exposure lines up at windows, doors and corners.
• Stainless or hot-dipped galvanized fasteners are used so they do not stain or corrode.
• Corners are woven or finished with boards, and trim is detailed to shed water.
• Pre-finished product is touched up at cuts; natural cedar is left to weather or finished as you choose.

• The house is a cape, shingle-style cottage or historic home where cedar belongs
• Existing shingles are cupped, split, missing or black with mildew
• A historic district or your own taste calls for real wood
• You want a natural finish that weathers to silver-gray

• Clapboard versus shingle, and grade of cedar
• Pre-finished versus natural or site-finished
• Coursing detail, corner treatment and trim
• Wall area, height and tear-off
• Any rainscreen or drainage layer behind the siding

Every job is priced from a free on-site visit. Typical ranges for the trade are on our siding page, and the details of this service are on the cedar siding and shingles overview.

For a deeper walkthrough of materials, code details and photos, see our full Cedar Siding & Shingles: A Traditional Maine Look That Needs the Right Prep Underneath guide.

Back to the Buxton exterior services overview, or see every town on our service areas page.