Vinyl siding and new shingles on a North Deering, Portland home by Cardinal Exteriors

Vinyl Siding Installation in New Gloucester, Maine

Vinyl Siding Installation for New Gloucester homes from a family-owned Portland company. An owner measures on site and writes a fixed-price proposal.

  • Google reviews
  • Fully licensed & insured
  • Free estimates
  • 20+ years combined experience

Vinyl Siding Installation for New Gloucester homes

Roughly 31 percent of New Gloucester's houses were built in 2000 or later, and vinyl is what most of them wear. On houses along the newer subdivision roads, a premium panel with a thicker gauge and a rolled nailing hem stands up better to cold-weather impacts and to gusts crossing open farmland than the thin builder panel it replaces. Insulated vinyl, with foam backing bonded to the panel, adds stiffness so long walls stay flat, and it puts a modest thermal break over the sheathing.

Vinyl is a harder call in the old village. The New Gloucester Historic District's appeal is its Georgian and Federal houses, many built before 1810, whose cornerboards, cornices and window casings thin vinyl trim can flatten into a generic box. If vinyl is the budget choice on an older house, pick a narrow clapboard reveal, keep or rebuild the wood trim and let the vinyl die into it, and choose colors from a period palette rather than bright white. Because the town's handout does not require a permit for re-siding, that judgment rests with you as the owner.

Front elevation of a Scarborough home after vinyl siding replacement

How a Siding Wall Assembly Works

  1. Sheathing — the structural wall surface everything else attaches to
  2. Weather-resistive barrier — a wrapped membrane that stops bulk water while letting vapor escape
  3. Rainscreen gap — a drainage and drying space between the barrier and the siding
  4. Siding — the visible cladding, fastened over the furring strips
  5. Window flashing — tucked under the barrier above and lapped over the siding below, so water never gets behind it
Vinyl siding outside corner post detail on a Scarborough home

New Gloucester housing at a glance

Census estimates put New Gloucester at about 2,260 housing units with a median year built of 1991. About 11 percent of homes predate 1940 and roughly one in five predates 1960, but the largest share, about 31 percent, has been built in 2000 or later. Only about 15 percent date from 1960 to 1979, a much thinner mid-century layer than in neighboring Gray. Around 70 percent of units are single-family detached houses, and about 83 percent of occupied homes are owner-occupied. Seasonal homes are rare, about two dozen by the survey's count, so nearly every house here is lived in year-round. The oldest houses are notable: the village holds many wood-frame houses built before 1810 in Georgian and Federal styles, and Intervale Farm's circa-1811 brick farmhouse is joined to its barn by a string of wood-frame additions.

Weather and exposure in New Gloucester

New Gloucester is inland farm country, with the town center at roughly 364 feet and no salt exposure. The nearest long-term record is next door: NOAA's 1991-2020 normals for the Gray station list about 84 inches of snow a year, and January there averages near 22 degrees. The town's own code enforcement handout gives the figures it builds to, a total snow load of 70 pounds per square foot and a 100 mph wind speed. Open fields along the Intervale and around the farms let wind drive snow and rain against the long walls of connected farmhouses, and repeated freeze-thaw cycles work into any joint that holds water.

Permits and design review in New Gloucester

New Gloucester's Code Enforcement Officer, who also serves as plumbing inspector and health officer, issues building permits. Under Article 6.1.1 of the zoning ordinance, no structure may be erected, moved, added to or structurally altered without one. The office's handout says regular maintenance such as roofing, siding and window replacement needs no permit when it does not alter the structure. Decks do: the permit checklist asks for a foundation plan, framing cross sections and a signed plot plan with setbacks. The town's FAQ notes that work within 100 feet of a water body may need Maine DEP approval.

New Gloucester at a Glance

What the housing stock and local code enforcement mean for a siding, window, roofing or deck job here.

5,676

Population (ACS estimate)

Median year built: 1991

Homes built before 194011%

Mostly vinyl or fiber-cement siding and insulated replacement windows from recent decades.

State Building & Energy Code (MUBEC)

Enforced — population over 4,000

EPA Lead-Safe Rule (pre-1978 homes)

Applies to at least 21% of homes here

Historic District

Exterior work may need design review

Shoreland Zoning

Applies near the water

Permits

New Gloucester Code Enforcement Office

Codes & Permits for Vinyl Siding in New Gloucester

In New Gloucester, exterior-work permits come from the New Gloucester Code Enforcement Office (385 Intervale Road, New Gloucester, ME 04260, (207) 926-4126 x3). With 5,676 residents, over 4,000, New Gloucester is required to enforce the Maine Uniform Building and Energy Code (MUBEC). The New Gloucester Historic District covers the Georgian and Federal-era houses of the old village and Shaker Village.

  • Maine's adopted 2021 IRC (R703.11) governs vinyl siding and references ASTM D3679 as the vinyl-siding product standard. up.codes
  • Vinyl siding fasteners must penetrate a minimum of 1.25 inches into sheathing and framing combined when installed over wood/wood-structural-panel sheathing (R703.3.4), with maximum fastener spacing of 16 inches on center per Table R703.3(1); additional rules apply when installed over foam plastic sheathing (R703.11.2). up.codes
  • Maine's Shoreland Zoning Act creates a regulated shoreland zone extending 250 feet (horizontal distance) from the normal high-water line of any great pond, river, or coastal wetland, and 75 feet from certain streams; the Act's stated purposes include protecting buildings and land from flooding/erosion and controlling water pollution, and it governs deck and other structure setbacks and the expansion of nonconforming structures within that zone (specific setback/expansion rules are set at the municipal-ordinance level under the state's model guidelines). maine.gov
  • By Maine law (25 M.R.S. §2373), 'the code must be enforced in a municipality that has more than 4,000 residents' (per the most recent federal census); municipalities at or below that population are not required to adopt/enforce MUBEC but may opt in locally, per the state's own program page: 'All municipalities with a population greater than 4,000 are required, by statute, to enforce the MUBEC. Municipalities with a population under 4,000 may choose to enforce the MUBEC.' mainelegislature.org

How Cardinal Exteriors Handles Vinyl Siding in New Gloucester

  • With 5,676 residents, New Gloucester is over Maine's 4,000-resident line, so the town enforces the statewide Uniform Building and Energy Code (MUBEC) on top of its own permit process.
  • With 21% of New Gloucester's housing built before 1960, a real share of that stock predates 1978 as well, which means EPA lead-safe containment is part of vinyl siding installation on an older New Gloucester home more often than not.
  • The New Gloucester Historic District covers the Georgian and Federal-era houses of the old village and Shaker Village. That review is worth confirming with the town before materials are ordered, not after.
  • Because New Gloucester has coastal, lake or river frontage, Maine's Mandatory Shoreland Zoning Act may apply to work close to the water, which can affect setbacks on a rebuild.
  • We file for vinyl siding installation permits at the New Gloucester Code Enforcement Office before work starts, not after.
New Gloucester, ME
A rural stretch of Town Farm Road in New Gloucester, between Pineland Farms and Sabbathday Lake Shaker Village.
Street View © Google

What vinyl siding installation involves

Premium vinyl siding is the fastest way to a tight, low-maintenance exterior. Today's thicker panels come in clapboard, Dutch lap, board-and-batten and shake profiles and in colors that were not possible a generation ago. The projects shown on this site include CertainTeed Monogram vinyl siding, used to replace rotting wood clapboards and 1970s metal siding on Portland homes. Vinyl moves with temperature, so how it is hung matters as much as which panel you pick.

  • Old siding is removed and the wall is checked for soft sheathing and past leaks.
  • House wrap and flashing go on first, with extra care around windows, doors and roof-to-wall joints.
  • Starter strip, J-channel and corner posts are set straight and level so every course lines up.
  • Panels are nailed in the center of the slots and left loose enough to expand and contract through a Maine winter and summer.
  • Trim is wrapped or replaced with low-maintenance millwork so there is nothing left to paint.

Signs it is time

  • You are tired of repainting wood clapboards every few years
  • The existing vinyl is faded, cracked, or loose after wind storms
  • The budget needs a whole-house result rather than one premium wall
  • You want an insulated panel to take the edge off drafty walls

What affects the price of vinyl siding installation

  • Panel grade and thickness, and whether it is insulated
  • Profile: clapboard, Dutch lap, board-and-batten or shake
  • Amount of trim, soffit and fascia wrapped or replaced
  • Tear-off and sheathing repairs
  • House height and access

Every job is priced from a free on-site visit. Typical ranges for the trade are on our siding page, and the details of this service are on the vinyl siding installation overview.

For a deeper walkthrough of materials, code details and photos, see our full Vinyl Siding Installation: Built to Move With a Maine Winter guide.

Get a free vinyl siding installation estimate in New Gloucester

Tell us about the house and what you want changed. One of the owners will call to set up a visit, measure, and write a fixed-price proposal. No pressure, no obligation.

Need it today?Call Mike (207) 408-5388

or Bob at (207) 252-0759