Composite & PVC Decks in Bath, Maine

Census estimates put Bath's median home built around 1938, with about 58 percent of the housing predating 1940 and roughly 67 percent predating 1960, the oldest housing profile of any town in this service area. Bath's sea-captains' houses and worker cottages from the height of the Bath Iron Works and wooden shipbuilding era make up a large share of the city's stock, many carrying original wood clapboard behind one or more later layers of siding. Outside the historic core, Bath's newer neighborhoods, built through the mid-to-late 20th century, hold a smaller share of more ordinary capes and ranches.

Building permits in Bath go through the Code Enforcement Office at 55 Front Street, covering siding, roofing, window and deck work for the whole city. Because so much of Bath's core falls within the Bath Historic District, exterior modifications to buildings inside the district require Planning Board review, though the city notes that review is often completed administratively within about three days rather than requiring a full public hearing. Part of Bath's sewer system uses combined sewers that can overflow during heavy rain, a factor mainly relevant to site and drainage work rather than siding, roofing, window or deck permitting directly, but it does mean the city pays close attention to stormwater management on any project that changes how water sheds off a property.

The tidal Kennebec River runs directly past downtown Bath, and river weather, wind, fog and occasional storm surge, affects houses close to the water more than those set back on higher ground. Winters bring the usual Maine freeze-thaw cycling and a real snow load, and Bath's older, less-insulated 19th-century housing is especially prone to ice damming at the eaves during a hard winter. Bath sits a few miles up the Kennebec from open water, so it takes less direct ocean salt spray than a town right on the Atlantic, but river humidity and wind still matter for exterior materials, especially near the waterfront and Bath Iron Works.

Composite and PVC decking do not need staining, do not splinter, and resist rot, which is why they have become the default for new decks in Maine. Composite boards blend wood fiber and plastic under a protective cap; PVC boards are all synthetic and lighter. The North Deering farmhouse on this site got a rebuilt deck with AZEK composite decking. The framing underneath is still wood, so it is built to last as long as the boards on top.

• Layout, size and board color are chosen with the owner at the estimate visit.
• Footings and framing are built to code, with joist spacing that suits the board manufacturer's span rules.
• Joist tape or flashing protects the tops of joists and the ledger.
• Boards go down with hidden fasteners or color-matched screws and the expansion gaps the product requires.
• Matching railings, stair treads, fascia and landings finish the deck.

• You are done staining and sealing a wood deck every year or two
• The deck is in shade or near water where wood stays damp
• You want a deck that stays barefoot-friendly with no splinters

• Composite versus PVC, and the product line
• Deck size, height and shape
• Railing system and stairs
• Hidden-fastener versus face-screw installation
• Footing and framing conditions

Every job is priced from a free on-site visit. Typical ranges for the trade are on our deck building page, and the details of this service are on the composite and PVC decks overview.

For a deeper walkthrough of materials, code details and photos, see our full Composite & PVC Decks: What Changes From Pressure-Treated Lumber guide.

Back to the Bath exterior services overview, or see every town on our service areas page.