Composite & PVC Decks in Brunswick, Maine

Census estimates put Brunswick at roughly 9,500 housing units with a median year built of about 1982, so the typical house here is younger than in Portland but the range is wide. Close to one in five units dates from before 1940 and about 31 percent from before 1960, including the houses of the downtown and the Bowdoin neighborhoods. Another 16 percent or so went up between 1960 and 1979, and roughly 27 percent is from 2000 or later. About 71 percent of occupied homes are owner-occupied, and only about half of all units are single-family detached houses, which reflects the apartments, student housing and multi-unit buildings near the college and Maine Street. Seasonal homes are a small share, about 165 units. Expect clapboard Federal, Greek Revival and Colonial Revival houses in the historic districts, and vinyl-clad capes, ranches and colonials farther out.

Building permits in Brunswick go through the Planning and Codes Office at Town Hall, 85 Union Street, on paper or through the online permit portal. Maine's building code moved to the 2021 International Residential Code on April 7, 2025. Much of the historic core lies in the Village Review Overlay District, where the Village Review Board issues a Certificate of Appropriateness for alterations; the town notes that replacing windows, facades and ornamentation with identical styles and materials is not subject to review, and staff can approve minor work not visible from a public way. Waterfront lots within 250 feet of tidal areas also fall under shoreland zoning.

Brunswick is coastal on its south side and inland on its north. Mere Point, Maquoit Bay and Middle Bay put houses in the path of salt air and wind off Casco Bay, while neighborhoods near the Androscoggin and out toward Durham feel more like an inland town. The Portland Jetport, the nearest long-record National Weather Service station, averaged about 69 inches of snow a year over the 1991 to 2020 normals, and Brunswick's own climate table shows roughly 51 inches of total precipitation. Winters swing above and below freezing many times, which works water into clapboard joints, cracked caulk and shingle edges. Nor'easters drive rain sideways into the east and north walls, and the shore points take the hardest wind.

Composite and PVC decking do not need staining, do not splinter, and resist rot, which is why they have become the default for new decks in Maine. Composite boards blend wood fiber and plastic under a protective cap; PVC boards are all synthetic and lighter. The North Deering farmhouse on this site got a rebuilt deck with AZEK composite decking. The framing underneath is still wood, so it is built to last as long as the boards on top.

• Layout, size and board color are chosen with the owner at the estimate visit.
• Footings and framing are built to code, with joist spacing that suits the board manufacturer's span rules.
• Joist tape or flashing protects the tops of joists and the ledger.
• Boards go down with hidden fasteners or color-matched screws and the expansion gaps the product requires.
• Matching railings, stair treads, fascia and landings finish the deck.

• You are done staining and sealing a wood deck every year or two
• The deck is in shade or near water where wood stays damp
• You want a deck that stays barefoot-friendly with no splinters

• Composite versus PVC, and the product line
• Deck size, height and shape
• Railing system and stairs
• Hidden-fastener versus face-screw installation
• Footing and framing conditions

Every job is priced from a free on-site visit. Typical ranges for the trade are on our deck building page, and the details of this service are on the composite and PVC decks overview.

For a deeper walkthrough of materials, code details and photos, see our full Composite & PVC Decks: What Changes From Pressure-Treated Lumber guide.

Back to the Brunswick exterior services overview, or see every town on our service areas page.