Cedar Siding & Shingles in Brunswick, Maine

Cedar belongs to Brunswick's oldest houses and to its shore. Clapboard on the Federal Street and Lincoln Street houses was originally wood, and the captains' houses at Pennellville date from 1794 to 1860, long before any substitute existed. Replacing worn cedar clapboard with new cedar keeps the exact profile and reveal those houses were built with, and it is the straightforward path in the Village Review Overlay District, since the town exempts replacement with identical styles and materials from review.

Out on Mere Point, Bunganuc and the Maquoit Bay shore, cedar shingles suit the weathered coastal houses and camps and can be left to silver naturally or stained. Upkeep is the honest trade-off. On walls that face the bay, salt and sun break down finishes faster, and shaded sides under big pines can hold moisture and grow mildew, so shingles need open airflow behind them and stainless or hot-dipped galvanized fasteners that will not streak. Solid cedar also needs a stain or paint schedule every several years to stay tight. For owners who want the look without that upkeep, pre-stained cedar shingle panels and fiber cement shingles are the alternatives worth pricing side by side.

Census estimates put Brunswick at roughly 9,500 housing units with a median year built of about 1982, so the typical house here is younger than in Portland but the range is wide. Close to one in five units dates from before 1940 and about 31 percent from before 1960, including the houses of the downtown and the Bowdoin neighborhoods. Another 16 percent or so went up between 1960 and 1979, and roughly 27 percent is from 2000 or later. About 71 percent of occupied homes are owner-occupied, and only about half of all units are single-family detached houses, which reflects the apartments, student housing and multi-unit buildings near the college and Maine Street. Seasonal homes are a small share, about 165 units. Expect clapboard Federal, Greek Revival and Colonial Revival houses in the historic districts, and vinyl-clad capes, ranches and colonials farther out.

Brunswick is coastal on its south side and inland on its north. Mere Point, Maquoit Bay and Middle Bay put houses in the path of salt air and wind off Casco Bay, while neighborhoods near the Androscoggin and out toward Durham feel more like an inland town. The Portland Jetport, the nearest long-record National Weather Service station, averaged about 69 inches of snow a year over the 1991 to 2020 normals, and Brunswick's own climate table shows roughly 51 inches of total precipitation. Winters swing above and below freezing many times, which works water into clapboard joints, cracked caulk and shingle edges. Nor'easters drive rain sideways into the east and north walls, and the shore points take the hardest wind.

Building permits in Brunswick go through the Planning and Codes Office at Town Hall, 85 Union Street, on paper or through the online permit portal. Maine's building code moved to the 2021 International Residential Code on April 7, 2025. Much of the historic core lies in the Village Review Overlay District, where the Village Review Board issues a Certificate of Appropriateness for alterations; the town notes that replacing windows, facades and ornamentation with identical styles and materials is not subject to review, and staff can approve minor work not visible from a public way. Waterfront lots within 250 feet of tidal areas also fall under shoreland zoning.

Cedar clapboards and shingles are the original New England exterior, and for shingle-style cottages, capes and historic homes nothing else looks quite right. Cedar is naturally rot-resistant and light, but it is wood: it needs airflow behind it and a finish that suits the exposure. Pre-finished shingles, such as the Maibec shingles on several projects shown on this site, arrive stained or primed on all sides, which cuts the upkeep and evens out the color.

• Walls are stripped, repaired and wrapped; where it helps drying, a ventilated or drainage layer goes behind the cedar.
• Shingles are coursed and laid out so exposure lines up at windows, doors and corners.
• Stainless or hot-dipped galvanized fasteners are used so they do not stain or corrode.
• Corners are woven or finished with boards, and trim is detailed to shed water.
• Pre-finished product is touched up at cuts; natural cedar is left to weather or finished as you choose.

• The house is a cape, shingle-style cottage or historic home where cedar belongs
• Existing shingles are cupped, split, missing or black with mildew
• A historic district or your own taste calls for real wood
• You want a natural finish that weathers to silver-gray

• Clapboard versus shingle, and grade of cedar
• Pre-finished versus natural or site-finished
• Coursing detail, corner treatment and trim
• Wall area, height and tear-off
• Any rainscreen or drainage layer behind the siding

Every job is priced from a free on-site visit. Typical ranges for the trade are on our siding page, and the details of this service are on the cedar siding and shingles overview.

Back to the Brunswick exterior services overview, or see every town on our Cumberland County service areas page.